fix: 去掉 Start-Process, bat 负责窗口/ps1 负责执行

根因: Start-Process pwsh 开新窗口但 claude 找不到 PATH,
同时 OneClick.bat 重复调用 install.ps1 导致双启动。

- install.ps1: 新增 -SkipLaunch 参数, step9 改为同步 & claude
- auto-setup.ps1: Phase7 去掉 Start-Process, 同步 & claude
- OneClick.bat: step7 加 -SkipLaunch, 最终块 start pwsh -Command claude
- 启动/更新.bat: 直接 start pwsh -Command claude (不经 install.ps1)

架构: bat 决定窗口类型, ps1 只管同步执行

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

Bookworm-OneClick.bat

@@ -202,12 +202,12 @@ echo   [7/8] 执行安装配置...
 echo.
 
 if exist "%INSTALL_DIR%\install.ps1" (
-    :: 优先 pwsh (PowerShell 7), 回退 powershell (5.1)
+    :: 安装配置 (不启动 claude, 最终块负责在 pwsh7 窗口中启动)
     where pwsh >nul 2>nul
     if !errorlevel! equ 0 (
-        pwsh -NoLogo -ExecutionPolicy Bypass -File "%INSTALL_DIR%\install.ps1" -AutoAccept
+        pwsh -NoLogo -ExecutionPolicy Bypass -File "%INSTALL_DIR%\install.ps1" -AutoAccept -SkipLaunch
     ) else (
-        powershell -NoLogo -ExecutionPolicy Bypass -File "%INSTALL_DIR%\install.ps1" -AutoAccept
+        powershell -NoLogo -ExecutionPolicy Bypass -File "%INSTALL_DIR%\install.ps1" -AutoAccept -SkipLaunch
     )
 ) else (
     echo     [WARN] install.ps1 未找到, 跳过高级配置
@@ -266,14 +266,12 @@ if %ERRORS% gtr 0 (
 echo   按任意键启动 Bookworm...
 pause > nul
 
-:: 启动 — 优先在 pwsh7 新窗口中运行
-cd /d "%INSTALL_DIR%"
+:: 启动 — pwsh7 新窗口直接运行 claude
 where pwsh >nul 2>nul
 if !errorlevel! equ 0 (
-    start "Bookworm Smart Assistant" pwsh -NoLogo -ExecutionPolicy Bypass -File "%INSTALL_DIR%\install.ps1" -StartOnly -AutoAccept
-) else if exist "启动Bookworm.bat" (
-    call "启动Bookworm.bat"
+    start "Bookworm Smart Assistant" pwsh -NoLogo -NoExit -Command "& claude --dangerously-skip-permissions"
 ) else (
+    cd /d "%INSTALL_DIR%"
     powershell -NoLogo -ExecutionPolicy Bypass -File "%INSTALL_DIR%\install.ps1" -StartOnly -AutoAccept
 )
 

auto-setup.ps1

@@ -863,13 +863,7 @@ if ($allOK -and $env:ANTHROPIC_API_KEY) {
         Write-Host ""
         Log-Info "正在启动 Claude Code..."
         Write-Host ""
-        # 始终在独立 pwsh7 窗口中启动 (bat 调 pwsh 子进程时窗口仍属 cmd.exe)
-        $pwshCmd = Get-Command pwsh -ErrorAction SilentlyContinue
-        if ($pwshCmd) {
-            Start-Process $pwshCmd.Source -ArgumentList "-NoLogo", "-NoExit", "-Command", "& claude --dangerously-skip-permissions" -WorkingDirectory $env:USERPROFILE -WindowStyle Normal
-        } else {
-            & claude --dangerously-skip-permissions
-        }
+        & claude --dangerously-skip-permissions
     }
 } else {
     Write-Host "  +---------------------------------------------------+" -ForegroundColor Yellow
@@ -885,11 +879,6 @@ if ($allOK -and $env:ANTHROPIC_API_KEY) {
 
     $launchResult = Show-MsgBox "安装完成, 但存在以下问题:`n$issueText`n`n是否仍然启动 Claude Code?`n(将以受限模式运行)" "安装警告" "YesNo" "Warning"
     if ($launchResult -eq "Yes" -and -not $SkipLaunch) {
-        $pwshCmd = Get-Command pwsh -ErrorAction SilentlyContinue
-        if ($pwshCmd) {
-            Start-Process $pwshCmd.Source -ArgumentList "-NoLogo", "-NoExit", "-Command", "& claude --dangerously-skip-permissions" -WorkingDirectory $env:USERPROFILE -WindowStyle Normal
-        } else {
-            & claude --dangerously-skip-permissions
-        }
+        & claude --dangerously-skip-permissions
     }
 }

install.ps1

@@ -19,7 +19,8 @@ param(
     [string]$GitUrl = "https://code.letcareme.com/bookworm/bookworm-config.git",
     [switch]$StartOnly,
     [switch]$SkipSecrets,
-    [switch]$AutoAccept  # 豁免所有人工确认环节
+    [switch]$SkipLaunch,    # 仅安装不启动 (由调用方负责启动)
+    [switch]$AutoAccept     # 豁免所有人工确认环节
 )
 
 $ErrorActionPreference = "Stop"
@@ -727,12 +728,9 @@ if (-not $StartOnly) {
     }
 }
 
-# 始终在独立 pwsh7 窗口中启动 Claude Code
-# (bat 调 pwsh 子进程时窗口仍属 cmd.exe, 必须 Start-Process 新建窗口)
-$pwshCmd = Get-Command pwsh -ErrorAction SilentlyContinue
-if ($pwshCmd) {
-    Write-Host "  [..] 正在启动 Claude Code (PowerShell 7)..." -ForegroundColor Cyan
-    Start-Process $pwshCmd.Source -ArgumentList "-NoLogo", "-NoExit", "-Command", "& claude --dangerously-skip-permissions" -WorkingDirectory $env:USERPROFILE -WindowStyle Normal
+# 启动 Claude Code (同步执行, 窗口类型由调用方 .bat 决定)
+if ($SkipLaunch) {
+    Write-Host "  [OK] 安装完成 (由调用方负责启动)" -ForegroundColor Green
 } else {
     & claude --dangerously-skip-permissions
 }

启动Bookworm.bat

@@ -6,10 +6,10 @@ cd /d "%~dp0"
 set NO_PROXY=bww.letcareme.com,code.letcareme.com,letcareme.com,localhost,127.0.0.1
 set no_proxy=%NO_PROXY%
 
-:: 优先 pwsh7: 启动新 PowerShell 7 窗口, 退出 cmd
+:: 优先 pwsh7: 直接在 pwsh7 窗口运行 claude
 where pwsh >nul 2>nul
 if %errorlevel% equ 0 (
-    start "Bookworm Smart Assistant" pwsh -NoLogo -ExecutionPolicy Bypass -File "%~dp0install.ps1" -StartOnly -AutoAccept
+    start "Bookworm Smart Assistant" pwsh -NoLogo -NoExit -Command "& claude --dangerously-skip-permissions"
     exit
 )
 

更新并启动Bookworm.bat

@@ -6,19 +6,24 @@ cd /d "%~dp0"
 set NO_PROXY=bww.letcareme.com,code.letcareme.com,letcareme.com,localhost,127.0.0.1
 set no_proxy=%NO_PROXY%
 
-:: 优先 pwsh7: 启动新 PowerShell 7 窗口, 退出 cmd
+:: 先更新配置 (在 cmd 中完成)
 where pwsh >nul 2>nul
 if %errorlevel% equ 0 (
-    start "Bookworm - 更新并启动" pwsh -NoLogo -ExecutionPolicy Bypass -File "%~dp0install.ps1" -AutoAccept
+    pwsh -NoLogo -ExecutionPolicy Bypass -File "%~dp0install.ps1" -AutoAccept -SkipLaunch
+) else (
+    powershell -ExecutionPolicy Bypass -File "%~dp0install.ps1" -AutoAccept -SkipLaunch
+)
+
+:: 更新后在 pwsh7 新窗口启动 claude
+where pwsh >nul 2>nul
+if %errorlevel% equ 0 (
+    start "Bookworm Smart Assistant" pwsh -NoLogo -NoExit -Command "& claude --dangerously-skip-permissions"
     exit
 )
 
 :: 回退 PowerShell 5.1
-title Bookworm Portable - 更新并启动
-echo.
-echo   [!] PowerShell 7 未安装, 使用 PowerShell 5.1
-echo.
-powershell -ExecutionPolicy Bypass -File install.ps1 -AutoAccept
+title Bookworm Portable
+powershell -ExecutionPolicy Bypass -File "%~dp0install.ps1" -StartOnly -AutoAccept
 if %errorlevel% neq 0 (
     echo.
     echo   启动失败，按任意键退出...